Contact

What are you looking for?

German AfPS Publishes Latest Version of PAH Specifications Under GS-Mark

SafeGuardSElectrical & Electronics, Electrical & Electronics, Electrical & Electronics, Hardgoods, Hardgoods, Hardgoods, Hardgoods, Softlines, Softlines, Softlines, SoftlinesMay 18, 2020

Germany’s Product Safety Committee has published the April 2020 version of AfPS GS 2019:01 PAK under the voluntary GS-Mark. This latest edition clarifies the scope of Category 1 materials.

In May 2019, the German Product Safety Committee (Ausschuss für Produktsicherheit, AfPS) issued AfPS GS 2019:01 PAK on a new set of specifications for polycyclic aromatic hydrocarbons (PAHs) under the voluntary Geprüfte Sicherheit Mark (GS-Mark, ‘Tested Safety’ Mark). This document on the testing, evaluation and specifications on PAHs replaces AfPS GS 2014:01 PAK and will become mandatory for issuing the GS-Mark from July 1, 2020. The GS mark can only be awarded to ready-to-use products (e.g. machines, hand tools, toys, electrical appliances, lights, household appliances or furniture) as outlined in Chapter 5 of the German Product Safety law (ProdSG).

On April 10, 2020, the AfPS issued the latest version of AfPS GS 2019:01 PAK. This latest edition, in German and English, clarifies the scope of materials falling under Category 1, which applies to:

  • Materials intended to be placed in the mouth, or
  • Materials coming into long-term contact with the skin (more than 30 seconds) during intended use:
    • In toys falling under the scope of Directive 2009/48/EC (Toy Safety Directive, TSD), or
    • For use by children up to three years of age

The other provisions in AfPS GS 2019:01 PAK of April 2020 are essentially similar to those in the May 2019 AfPS GS 2019:01 PAK document. 

In Germany, PAHs are still a critical group of substances in consumer products. These have an impact on the meaningful test scope of consumer goods where GS-Mark certification is not desirable. According to §30 of the German Food and Feed Code ((Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch, LFGB) on general product safety and recommendations from the German Federal Institute for Risk Assessment (Bundesinstitut für Risikobewertung, BfR) to reduce the amount of PAHs in consumer products as much as possible, it is advisable to continue testing according to the list of PAHs in AfPS GS 2014:01 PAK after its sunset date of June 30, 2020

Highlights of the PAH requirements in AfPS GS 2019:01 PAK of April 10, 2020 for GS-Mark certification are summarized in Table 1.

German Product Safety Commission (AfPS) 
Testing and Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in the Award of GS Marks – Specification Pursuant to Article 21(1) No. 3 of the Product Safety Act (ProdSG)
AfPS GS 2019:01 PAK, April 10, 2020

Category 1Category 2Category 3
 

Materials intended to be placed in the mouth, 
or materials coming into long-term contact with skin (> 30 seconds) during intended use:

  • In toys (Directive 2009/48/EC) or
  • For use by children*, ** up to 3 years of age

(mg/kg)

Materials not covered by Category 1, coming into long-term contact (> 30 seconds) or short-term repetitive contact*** with skin during intended or foreseeable use
Materials not covered by Category 1 or 2, coming into short-term contact (≤ 30 seconds) with skin during intended or foreseeable use

2a
Used by children under 14

(mg/g)

2b
Other consumer products

(mg/kg)

3a
Used by children under 14

(mg/kg)

3b
Other consumer products

(mg/kg)

Benzo[a]pyrene
< 0.2
< 0.2
< 0.5< 0.5
< 1
Benzo[e]pyrene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Benzo[a]anthracene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Benzo[b]fluoranthene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Benzo[j]fluoranthene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Benzo[k]fluoranthene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Chrysene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Dibenzo[a,h]anthracene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Benzo[g,h,i]perylene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Indeno[1,2,3-cd]pyrene
< 0.2
< 0.2
< 0.5
< 0.5
< 1
Anthracene, fluoranthene, phenanthrene, pyrene
< 1
(sum)
< 5
(sum)
< 10
(sum)
< 20
(sum)
< 50
(sum)
Naphthalene
< 1< 2< 10
Sum of 15 PAHs< 1< 5< 10< 20< 50 
PASS

Table 1.

SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.

For enquiries, please contact:

Dr. Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420

Dr. Udo Krischke
Global Technical Manager, RSTS
t: +49 6128 744 235 

© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’ prior written consent.

Stay on top of regulatory changes within your industry
Read more articles for the Consumer Goods and Retail industry
  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152, 1211,

Geneva, Switzerland